Buffalo Hunter, .58 caliber, 25" tapered round barrel, percussion, beech, brass, used, by Antonio Zoli & Co. for Navy Arms

Home > Guns > Brand name factory finished guns > Navy Arms - Ridgefield, New Jersey

Buffalo Hunter,
.58 caliber, 25" tapered round barrel,
percussion, beech, brass,
used, by Antonio Zoli & Co. for Navy Arms

Part Number:	AAW-237
Availability:

This is the Buffalo Hunter, a replica of the frontier rifle made from the famous U.S. Model 1863 contract musket by Remington. This used rifle is trimmed in brass furniture with patchbox. The barrel is fitted with a blade front sight with a step adjustable rear sight. The stock has numerous handling marks from use. The bore is bright, but has scattered pitting running its entire length. Trigger reach is 13-3/4" to fit today's average size shooter. Weight is 8.3 pounds.

The .58 caliber tapered round 25 inch barrel is rifled with three equal lands and grooves, exactly like the original. Nicely polished and blued, the blue finish has speckling and pits running along its entire exterior. The bore is bright, but has scattered pitting running along its entire length. Made by Antonio Zoli, this famous gun maker's name is marked in small letters at the breech and the Italian proof marks are on the side flat on the breech, along with the caliber and black powder warning. The barrel is retained with a single bolt that passes through the rounded tang, and a wedge key through the forearm.

The beech halfstock is fitted with brass furniture that has developed a mellow patina from use. The beech stock is stained and finished to a light brown. The stock has many handling marks and two larger dents are found along the toe line. The wrist is checkered to provide a secure grip. The checkering shows a few dents and dings from handling. The brass patchbox is retained with three blued steel screws, as original. The bow of the triggerguard is fitted with a loop for a sling swivel, the bow is positioned backwards on this example. No forward swivel is mounted, as is typical for this model. The brown synthetic ramrod is fitted with a brass loading tip. We recommend our #RAMROD-C-29-10 to better service this rifle. Two brass sideplate washers are inlet flush into the stock, and counter bored to accept the two lock bolts.

The eagle stamp is faint on the lock plate, nearly obscured by the bright color case hardened finish of the lock. The lock plate is marked with the name NAVY ARMS Co along the lower edge. The lock works crisply, and provides fast and reliable ignition. The breech plug bolster is threaded with a bronze nipple for No. 11 percussion caps. We can supply the 5/16-24 nipples #MMS-I for musket caps, at a small extra cost, so you may shoot both types of percussion caps. The single trigger provides a smooth release of the lock.

This Buffalo Hunter rifle will be perfect for your next big game hunt and will be a handy rifle to carry in the deep woods. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .57 caliber, Minie, Enfield .577", Lyman 577-611, 530 grain, pure lead, hollow base, per 25

Part Number:	BALL-57-MINIE
Availability:
Price:	$24.09
Order Quantity:

bullets, .58 caliber, Minie, Springfield .575", Lyman 575-213, 510 grain, pure lead, hollow base, per 25

Part Number:	BALL-58-MINIE
Availability:
Price:	$22.99
Order Quantity:

.562" round balls, pure lead, hand cast, per 50

Part Number:	BALL-562-X
Availability:
Price:	$16.69
Order Quantity:

.570" round balls, pure lead, Hornady, per 50

Part Number:	BALL-570
Availability:
Price:	$12.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .58 caliber brass collar, 10-32 thread

Part Number:	BP-58-10
Availability:
Price:	$4.29
Order Quantity:

Bore brush, bronze, for .58 caliber, 10-32 thread

Part Number:	BRUSH-58-10
Availability:
Price:	$4.29
Order Quantity:

Powder Flask, U. S. Model 1855 Peace & Friendship, brass, with lanyard rings accepts 10-1mm threaded spouts

Part Number:	FLASK-PEACE
Availability:
Price:	$54.99

Fouling Scraper, flat face, brass, .58 caliber, 10-32 thread

Part Number:	FS-58-10
Availability:
Price:	$4.79
Order Quantity:

Jag, jagged cleaning tip, brass, .58 caliber, 3/8" rod, 10-32 thread

Part Number:	JS-58-6-10
Availability:
Price:	$5.09
Order Quantity:

SPG Bullet Lubricant, one 1-1/4 ounce stick, for Black or Smokeless Powder

Part Number:	LUBE-SPG
Availability:
Price:	$5.19
Order Quantity:

Nipple, 5/16-24 thread, for Springfield musket, musket cap, hardened steel, 1/4" square lug

Cone length: 0.475"
Thread journal length: 0.275"
Overall length: 0.750"
Diameter of base: 0.370"

Part Number:	MMS-I
Availability:
Price:	$7.99
Order Quantity:

Nipple, 5/16-24 thread, for Springfield musket, musket cap, stainless steel

Cone length: 0.475"
Thread journal length: 0.275"
Overall length: 0.750"
Diameter of base: 0.370"

Part Number:	MMS-S
Availability:
Price:	$7.99
Order Quantity:

Nipple Wrench for Muskets, with slotted socket, for square or flat side nipples

Part Number:	NW-100
Availability:
Price:	$9.99
Order Quantity:

Shooting patches, .010" cotton, .50 - .59 caliber, per 100, oiled

Part Number:	OX-10-50-L
Availability:
Price:	$6.99
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Adapter for military rod, Italian Springfield musket, 5-.8mm female to 10-32 female

Part Number:	SA-10-ITALY
Availability:
Price:	$2.99
Order Quantity:

Flask Spout, 75 grains, 10-1mm standard thread fits replica flasks from Italy, solid brass, made in the U.S.A.

Part Number:	SP-075
Availability:
Price:	$5.19
Order Quantity:

Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers.

Part Number:	ST-8
Availability:
Price:	$9.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Ramrod Worm, 5-.8mm metric female thread to fit Davide Pedersoli Second Model Brown Bess military ramrod, for cleaning muskets, removing patches, cards, wads,

Part Number:	WORM-DP
Availability:
Price:	$9.99

Top of Page Home > Guns > Brand name factory finished guns > Navy Arms - Ridgefield, New Jersey