Golden Age Longrifle
.45 caliber, 37" straight octagon barrel,
maple, brass trim, Siler lock,
used, signed by L Bryner
Part Number: AAW-409
Availability: Item has been shipped out for inspection, and at this time, is NOT available. You can click "Notify Me" and enter your email address.  We will notify you IF this item becomes available again.
  
This longrifle is signed L. Bryner on the barrel and appears to be influenced by examples from Dr James B. Whisker's Gunsmiths of Virginia, and Gunsmiths of West Virginia longrifle books. It features a curly maple stock, straight octagon barrel, brass patchbox, double set triggers, and small Siler flintlock. This rifle has been fired and has a few marks on the frizzen and around the vent. The brass furniture has developed a mellow patina from long storage. Trigger reach is 13-3/4" to fit todays average size shooter. This slender rifle weighs 6.7 pounds.

The .45 caliber barrel is 13/16" straight octagon by 37" long. The bore is cut rifled with eight lands and grooves and the style of the rifling appears to be from Green Mountain Barrel Company. The bore is bright and has been well maintained. A silver blade front sight with brass base is dovetailed behind the muzzle. The simple fixed rear sight is dovetailed 11" ahead of the breech. Shooters with "older" eyes or corrective lenses will generally benefit from the extra distance.

Stocked in curly maple, this flint rifle has attractive figure over the length of the stock. The stock is stained to dark brown with a golden undertone. The buttstock has a slender profile with a early-19th century crescent buttplate to engage the shooters shoulder. Recoil should be very modest with this .45 caliber rifle, making it comfortable to aim and shoot. The buttplate has a brass comb extension that is nicely hand engraved. The four piece brass patchbox is shaped with a decorative head with piercing. The door is cam-over-center spring design. It has a small storage cavity beneath the door. The wrist sweeps up to meet the flared tang. The wrist inlay is engraved R.B.. The triggerguard is a wide early Germanic style with offset grip rail. Forward the ramrod is retained by two forward pipes and one entry pipe, holding the 3/8 wooden ramrod in position. The ramrod has 10-32 threads for accessories. A brass muzzlecap is installed on the rifle to protect the end grain of the wood at the end of the forearm. The side panel is fitted with a surface mounted brass sideplate, with a hand engraved stylized Federal eagle design. The square cheek piece with molded edge has a hand engraved hunter's star.

Sure fire ignition is provided by a small Siler flintlock. The lock has a Germanic influence with a octagon pan and pointed tail with a filed vertical molding. The lock is finished to a dark brown. We recommend our 5/8" knapped English gun flints for use with this lock. The barrel has a direct drilled vent hole and is well positioned and centered on the pan. Double lever double set triggers by R. E. Davis are tuned to allow the lock to be cocked, or the trigger set, in any sequence. Adjust the screw between the two triggers, inboard to reduce set trigger release pressure, our outboard to require a stronger pressure. The set trigger can provide very light release, for accurate aimed shooting during pleasant weather.

This longrifle is used with a few marks on it from firing and cleaning. The bore is bright, the lock sparks well, and the double set triggers fire set, or unset. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.440" round balls, pure lead, Hornady, per 100
.440" round balls, pure lead, Hornady, per 100
Part Number: BALL-440
Availability: In Stock
Price: $15.59
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $4.59
Order Quantity:
Ball puller, steel screw, .45 caliber brass collar, 10-32 thread
Ball puller, steel screw, .45 caliber brass collar, 10-32 thread
Part Number: BP-45-10
Availability: In Stock
Price: $3.89
Order Quantity:
Bore brush, bronze, for .45 caliber, 10-32 thread
Bore brush, bronze, for .45 caliber, 10-32 thread
Part Number: BRUSH-45-10
Availability: In Stock
Price: $4.29
Order Quantity:
Flint priming flask, throws about 3 grains, brass
Flint priming flask, throws about 3 grains, brass
Part Number: FLASK-PP-3
Availability: In Stock
Price: $19.99
Order Quantity:
French amber gun flint, 5/8 x 3/4" for small Siler, L&R Bailes, CVA, T/C, Pedersoli. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
French amber gun flint, 5/8 x 3/4" for small Siler, L&R Bailes, CVA, T/C, Pedersoli. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Part Number: FLINT-AMBER-5
Availability: In Stock
Price: $2.90
Order Quantity:
Fouling Scraper, flat face, brass, .45 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .45 caliber, 10-32 thread
Part Number: FS-45-10
Availability: In Stock
Price: $4.09
Order Quantity:
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread
Part Number: JS-45-6-10
Availability: In Stock
Price: $4.59
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $22.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: Out of Stock, request notification when available.
Price: $8.59
  
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry
Part Number: OX-15-40-D
Availability: In Stock
Price: $4.99
Order Quantity:
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber
Part Number: OX-CLEAN-45C
Availability: In Stock
Price: $4.49
Order Quantity:
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $15.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
  Ramrods cannot be send to a P O Box.
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $18.99
Order Quantity:
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.
Part Number: ST-6
Availability: In Stock
Price: $8.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: Out of Stock, request notification when available.
Price: $6.89
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2025Track of the Wolf, Inc.
Accepted Credit Cards